Specifications

PICED FAQ

Page 11

such as Philips Pronto remotes, Pocket PC's and Palm devices.

Step 1 - Establish IR Code numbers

The installer needs to establish what the manufacturer's IR code and IR data codes are for the

remote control buttons to be linked to the touch screen.

This is easily carried out by entering the Diagnostics page on an installed C-Bus Touch Screen,

then from this page going to the 'Unit Data' page, as shown below.

The touch screen will now recognise the IR codes for any button pressed on a generic IR remote

which has been set to control an NEC device. The touch screen will display the Manufacturer's IR

Code and Data Code, as shown below.