Specifications

PICED FAQ

Page 41

The Master C-Touch needs to be set up to :

1. Contain all of the Scenes for the site, each with a Trigger Group

2. Buttons to store each Scene (using the Scene Store Special Function). These buttons need to

be set up to be remotely activated via C-Bus.

The project on the portable device needs to contain the following :

1. A slider for every Group Address in the site

2. Buttons to trigger each of the Scenes stored in the C-Touch

3. Buttons to trigger a Scene store for each of the Scenes in the C-Touch

4. Scene nudge buttons for each Scene may also be useful

1.4.2.4 Displaying the status of a Scene

Problem

A Component needs to display whether a Scene is set or not.

Solution #1

If the component is setting the scene directly :

1. Add a C-Bus button to a page

2. Double click on it to open the Component Properties form

3. Select

Scene

in the

Key Function

list

4. Select the Scene in the

Scene Groups

list

5. Select the

status

tab

6. Select

Scene Indicator

Solution #2

If the component is setting the scene indirectly (via the Scene Trigger) :

1. Add a C-Bus button to a page

2. Double click on it to open the Component Properties form

3. Select

Preset

in the

Key Function

list

4. Select the Scene trigger Network, Application, Group Address and Level

5. Select the

status

tab