clipsal.
Contentss - New w Products Prod Pro ro 2005 2005 05 2
Contents – New Products 2005 Introduction to New Products 2005 C-Bus Wireless System C-Bus Wireless Wall Switches, 5850 and 5880 Series C-Bus Wireless Plug Adaptors, 5812 Series C-Bus Wireless Remote Control, 5888 Series C-Bus Wireless Gateway, 5800 Series C-Bus Colour Touch Screen, 5080CTC and 5050CTC Series C-Bus DLTTM, 5080DL and 5050DL Series 24 4 26 28 30 0 32 34 4 36 38 2 4 6 10 0 14 16 16 18 20 22 22 C-Bus Multi-Room Audio System C-Bus Audio Matrix Switcher C-Bus Audio Distributo
IIntroduction nt dutoction ntroduction ti New Ne N e Produ Products Pr P s C-Bus Wireless System A retrofitable solution for Home Automation. C-Bus Wireless Wall Switches Allows existing 240V wall switches to be replaced with C-Bus Wireless technology. C-Bus Wireless Plug Adaptors Allows devices plugged into 240V General Purpose Outlets to be controlled using C-Bus Wireless technology. C-Bus Wireless Remote Allows control of C-Bus Wireless Wall Switches and Plug Adaptor units remotely.
20 2005 TM Dynamic Labelling Technology An elegant solution for easy and flexible switch labelling. C-Bus Multi-Room Audio System Listen to and conveniently control music anywhere in the home. C-Bus Schedule Plus and HomeGate Software V.3 Includes a number of major new features, including a fully featured programmable logic engine. C-Bus Toolkit Software Includes an overhauled version of the C-Bus installation software with enhanced features and usability.
New Products Pr 2005 C-Bus Wireless System The C-Bus Wireless product range incorporates a family of C-Bus Radio Frequency (RF) devices, including Wall Switches, Plug Adaptors, a hand held Remote Control and a Gateway to Cat-5 Wired C-Bus units. C-Bus Wireless Wall Switches are designed to easily replace standard, 240V wall switches. They incorporate patented Clipsal technology and are two wire devices requiring no neutral connection (240V a.c. active and load connections only).
Basic Operation Buttons on a Wireless Wall Switch or Plug Adaptor are organised in pairs that control the output channels. Remaining pairs (free buttons) are used to control outputs on other units when multiple C-Bus Wireless units are configured as part of a network. For example, the figure below shows a 6 button, 2 channel Saturn Wireless Dimmer unit. Its buttons perform the following functions: Buttons 1 and 2 control the first channel. (A quick press on either button toggles the channel on or off.
New Products Pr 2005 C-Bus Wireless System C-Bus Wireless Networks Mode 1 To experience the full capabilities of wireless operation, C-Bus Wireless units are linked together to form a network. Stand-Alone Mode In this mode, C-Bus Wireless Wall Switches and Plug Adaptors act as stand-alone dimmers or switches and make no use of the inbuilt wireless capabilities.
Mode 3 Networked Mode In this mode, a C-Bus Wireless Wall Switch acts as a dimmer or switch and multiple C-Bus Wireless units can be linked to each other with the C-Bus Wireless technology. This mode is simple to setup, and is suitable for more complex installations. In this mode, local control buttons control the dimming or switch channel of the unit, and may also control other C-Bus Wireless units.
New Products Pr 2005 C-Bus Wireless Wall Switches 5850 and 5880 Series C-Bus Wireless Wall Switches allow existing, standard 240V a.c. wall switches to be replaced with a wall switch containing C-Bus Wireless technology. C-Bus Wireless Wall Switches are able to communicate with other C-Bus Wireless devices using Radio Frequency wireless messaging and form a C-Bus Wireless Network. Features Replaces standard, existing wall switches. Two-Wire connection (no neutral required).
Product Specifications Electrical Specifications Supply Voltage 2-Wire Leading Edge Dimmer Units – 1 & 2 Channel 240V a.c. @ 50Hz Min. Load Per Channel 25W Lamp or 0.25A Fan Motor Max. Load Per Channel 500W, 2A (Single Channel Unit) 250W, 1A (Two Channel Unit) Load Rating Incandescent / Halogen Iron Core LV Lighting Fan Motors Off State Power Consumption Off State Leakage Current Electrical Specifications Supply Voltage 2A 2A 2A 0.
New Products Pr 2005 C-Bus Wireless Wall Switches 5850 and 5880 Series Product Specifications RF C-Bus Specifications RF Frequency 433.92MHz Transmitting Power 1mW Maximum Range Control Functions 50m (Typical 15m - 20m) Load Switching, Dimming (LE / TE only), Timer, Relay Status Indicator Orange Warm-Up Time Mechanical Specifications Dimensions (L x W x H) 5 Seconds Neo Ulti Saturn 116 x 76 x 38.
Product Range C-Bus Wireless Wall Switch Dimmer Units Channels Type Current Part Number Neo 1 Leading Edge 2A 2 Leading Edge 1A 1 Trailing Edge 2A 2 Trailing Edge 1A 1 Leading Edge 2A 2 Leading Edge 1A 1 Trailing Edge 2A 2 Trailing Edge 1A 2 Button 4 Button 8 Button 5852D2L1AA 5854D2L1AA 5858D2L1AA – 5852D2T1AA – E5852D2L1TA – E5852D2T1TA – Leading Edge 2A 2 Leading Edge 1A 1 Trailing Edge 2A 2 Trailing Edge 1A 1 Leading Edge 2A 2 Leading Edge 1A 1 Traili
New Products Pr 2005 C-Bus Wireless Plug Adaptors 5812 Series C-Bus Wireless Plug Adaptors allow devices normally plugged into 240V a.c. General Purpose Outlets (for example, lounge or bedside lamps) to be controlled using C-Bus Wireless technology. C-Bus Wireless Plug Adaptors are able to communicate with other C-Bus Wireless devices (such as Wireless Wall Switches) using Radio Frequency wireless messaging and form a C-Bus Wireless Network.
Product Specifications Electrical Specifications Plug Adaptor Dimmer Unit (Leading Edge) Supply Voltage 240V a.c. @ 50Hz Max. Total Load 750W, 3A Load Rating Incandescent / Halogen Iron Core LV Lighting 3A 3A Electrical Specifications Plug Adaptor Dimmer Unit (Trailing Edge) Supply Voltage 240V a.c. @ 50Hz Max. Total Load 500W, 2A Load Rating Incandescent / Halogen Electronic LV Lighting 2A 2A Electrical Specifications Plug Adaptor Switch Unit Supply Voltage 240V a.c. @ 50Hz Max.
New Products Pr 2005 C-Bus Wireless Remote Control 5888 Series The C-Bus Wireless Remote Control allows a user to control buttons on C-Bus Wireless Wall Switch and Plug Adaptor units remotely. Unlike an infrared (IR) remote, it utilises radio frequency (RF) communication therefore, the user does not need to point it directly at the unit to be controlled. Up to 10 separate Wall Switch or Plug Adaptor buttons can be controlled by the Remote Control unit. These can be on various units on different networks.
Product Specifications Electrical Specifications RF Frequency 433.
New Products Pr 2005 C-Bus Wireless Gateway 5800 Series The C-Bus Wireless Gateway is used to link a C-Bus Wireless network to a C-Bus Cat-5 Wired network. It is functionally equivalent to a C-Bus Network Bridge. Using the Gateway, C-Bus Wireless and Cat-5 networks can communicate and interact with each other. Both Wireless and Cat-5 Networks use the same command structure.
Product Specifications Electrical Specifications Parameter C-Bus supply voltage RF frequency Transmitting power Typical range Maximum range Operating temperature range Operating humidity range Description 15 to 36 V d.c., 32 mA 433.
New Products Pr 2005 C-Touch Colour Touch screen 5080CTC and 5050CTC Series C-Touch Colour Touch Screen provides a wall mounted, touch sensitive LCD screen that can display pages of graphical items, such as buttons, sliders and images. These graphical items perform C-Bus related functions when pressed. The unit also includes a real time clock for automatic scheduling of events based on the time of day, week, month or year. The touch screen allows control via an Infrared handheld remote control unit.
Product Specifications Catalogue Number 5080CTC and 5050CTC Series Screen Type LCD active Matrix Screen Size 6.4 inch (diagonal) Screen resolution VGA, 640 x 480 pixels Pixel Pitch 0.204mm(H) x 0.202mm(V) Screen viewing area 130.6(H) mm x 97.0(V) mm Touch Overlay type Resistive membrane Viewing Angle: Horizontal: typical. 70° left and right Vertical: typical.
New Products Pr 2005 C-Bus Dynamic Labelling Technology TM 5080DL and 5050DL Series Clipsal’s new Dynamic Labelling Technology™ has been incorporated in C-Bus Saturn and Neo units allowing C-Bus installers to electronically label switches according to the requirements of the user and easily change this labelling via software, as required. Dynamic Labelling Technology™ switches incorporate editable LCD text or bitmap labels, plus function indicators such as bar-graphs.
Product Specifications Catalogue Number 5080DL and 5050DL Series C-Bus Supply Voltage 15 - 36V d.c. Current Drawn 22mA AC Input Impedance 50k @ 1kHz Max. No. of Units on Network Control Functions 50 units Load switching, Dimming, Timing, Scene Control Warm-Up Time 5 seconds Storage Temperature Range -10 - 60°C Operating Temperature Range 0 - 45°C Operating Humidity Range C-Bus Input Terminals -10 - 95% R.H. 0.2 - 1.
New Products Pr 2005 C-Bus Multi-Room Audio System The C-Bus Multi-Room Audio System allows users to listen to and control audio sources from convenient locations around a home. The system is both simple to install and easy to use. The system has been designed utilising new digital audio distribution technology (developed by Clipsal), in conjunction with Clipsal C-Bus core technology for system communication and integration.
Option A Option B Note 1 Depending on the number of amplifiers in an installation, and their power rating (25W or 10W RMS), C-Bus Audio Amplifiers may require a local power-pack connection. Note 2 The C-Bus Audio Distributor and Matrix Switcher are able to supply a limited amount of power to the Audio Amplifiers, as the system shares power available via the Cat-5 Audio network.
New Products Pr 2005 C-Bus Audio Matrix Switcher Cat No. 5560884 The Audio Matrix Switcher is a C-Bus unit, which switches four stereo audio inputs to any of the eight available digital audio outputs. These digital outputs are then distributed to C-Bus Audio Amplifiers via Cat-5 data cable. Switching audio sources is achieved via any C-Bus input device or via the control panel on the front of the Matrix Switcher. Features Digital audio distribution technology, for noise free audio reproduction.
Product Specifications Provisional Specifications Design Technology 16-bit Audio Path Sampling Rates 48kHz Source Inputs 4 Stereo Line Level Analogue 2 Mono all channel inputs 1 Digital Audio 1 TOSlink Zone Outputs 8 Digital Audio outputs Expansion Power Distribution Up to 3 Matrix Switches per system Centralised power sufficient for 6W per channel for each of 8 zones. Additional power requires local amplifier power supplies.
New Products Pr 2005 C-Bus Audio Distributor Cat No. 560011 The Audio Distribution unit is used to distribute a single stereo audio source to C-Bus Audio Amplifiers via a digitised signal over Cat-5 cable. This unit does not require any C-Bus programming. Features One stereo analogue audio source input. One digital audio output (cascadable to multiple zones). Cat-5 cable connection between Distributor and amplifiers. Provides limited power for amplifiers (with dc power pack connected).
Product Specifications Provisional Specifications Design Technology Sampling Rates Source Inputs Outputs Power Distribution 16-bit Audio Path 48kHz 1 Stereo Line Level Analogue 1 Digital Audio output Unit can use a local power supply (24V a.c./DC) or if connected to an amplifier, obtain power from the amp.
New Products Pr 2005 C-Bus Audio Amplifiers 5601 Series Desktop Audio Amplifier The desktop mounted, C-Bus Stereo Audio Amplifier, is rated at 25 Watt/Channel (RMS). Volume, Bass, Treble and Balance are all adjustable via C-Bus input devices. The Desktop Amplifier front panel includes Power on/off, Mute, Volume and source select buttons and an infrared target for remote control. Used in conjunction with the C-Bus Audio Matrix Switcher or the Audio Distribution unit.
Product Specifications Provisional Specifications Type Digital Stereo Pulse Width Modulated - 8x Oversampling Power 25W per channel and 10W per Channel (RMS) into 4 Ohms Power Connector 4pin mini DIN, 24V@3.5A Frequency 20Hz – 20kHz THD <0.
New Products Pr 2005 Software Schedule Plus and HomeGate V3 Featuring the new C-Bus Logic Engine Schedule Plus and HomeGate software packages provide a powerful and easy to use interface to C-Bus via a standard PC. Schedule Plus has been developed specifically for commercial and industrial applications, and HomeGate for residential environments. The software packages provide scheduling, manual control and monitoring of a C-Bus system from a PC running Windows 98SE, 2000, NT, ME or XP.
New C-Bus Enabled Logic Engine The Logic Engine forms an integrated part of the Schedule Plus and HomeGate packages. It provides a general-purpose means of describing the behavior of a system, and executes programs for the user to implement functions such as: The language has been extended to support automation functions such as: Control and Monitor C-Bus Groups / Scenes. C-Bus Tag names. Scheduling (time and date based events). Serial (RS232) and TCP/IP. Logic (conditional events).
New Products Pr 2005 C-Bus Toolkit Software 5000S/3 Series T The C-Bus Software Toolkit includes the new version of the C-Bus installation software. This new version supports WindowsTM 98SE, ME, 2000 and XP. The software supports a new and unique Barcode Scanning programming feature, in addition to traditional programming methods. The barcode scanning technique allows the installer to scan the C-Bus packaging of each new unit to automatically add the unit to the C-Bus project database.
Product Range Catalogue Number Description 5000S/3 C-Bus Toolkit Software 35
New Products Pr 2005 Infrared Distribution System 8050 Series The 8050 product series forms a flexible, cost effective multi-zone Infrared Distribution System, which can be used in isolation or as part of the Clipsal StarServe Home Networking range. This allows the homeowner to only control particular source equipment in certain areas of the home. For example, Set Top Box 1 can be controlled in the Bedrooms and Lounge; Set Top Box 2 can only be controlled in the Family Room and Kitchen.
IR Distribution System Components IR Distribution System Components IR Targets IR Distribution System Emitter Junction Box The 8050EJ has been designed to sit on top of or near the AV equipment. It is the main distribution hub of the IR Distribution Network. These targets contain an infrared receiver array, designed to receive and relay IR data from required locations to the centrally located Emitter Junction Box.
New Products Pr 2005 IR Remote Control Universal, Hand Held Cat No 5030URC The 5030URC is a universal, hand held, infrared remote control unit that is easy to program and use. It allows the user to control electronic devices that are equipped with an infrared (IR) remote. The 5030URC is simple to use via the touch screen panel and control buttons. When a device is selected, the appropriate screen appears. Up to 16 devices can be controlled, including C-Bus, VCRs, DVDs, TVs and satellite receivers.
Product Specifications Parameter Dimensions (W×H×D) Weight (without batteries) Description 82 ×185 × 30 mm 220 g (7.8 oz) Number of devices 16 LCD Screen (W×H) 60 × 82 mm (2.4 × 3.
Product of Clipsal Integrated Systems Pty Ltd Member of Clipsal Australia Holdings Group ABN 15 089 444 931 Head Office 12 Park Terrace, Bowden South Australia 5007 PO Box 103 Hindmarsh South Australia 5007 Telephone (08) 8440 0500 International +61 8 8440 0500 Facsimile International (08) 8346 0845 +61 8 8346 0845 Internet E-Mail www.clipsal.com/cis cis@clipsal.com.