Instruction manual

Multi Room Audio System
42
9) Configure any additional C-Bus units. Figure 37 shows the config-
uration of the 4 Channel Dimmer used in the example MRA system.
Figure 37 – Configuring the 4 Channel Dimmer in the example MRA system
10) Connect your PC to the C-Bus network in the usual way and open the
network (right click on the Network branch in the tree and select
Open Network). Scan the units in from the live network (click the
Units branch of the tree and then click the Scan Network button).
Use the “All -> Network” button to transfer the information from the
units in the database to the units on the C-Bus network.
Multiple Amplifiers in the Same Zone
You can connect multiple Amplifiers to the same zone. The Digital Input of
the first Amplifier in the zone is connected to the Digital Output of the
Matrix Switcher (or Distribution Unit). The Digital Output of the first
Amplifier is connected to the Digital Input of the next Amplifier and so on,
so that each Amplifier is connected to the previous in series.
When configuring Amplifiers connected in this way, set one Amplifier as a
Master and all others as Slaves (on the Audio Levels tab). It is recom-
mended you set a Desktop Amplifier as the Master if the zone includes any
Amplifiers of this type.