Instruction manual

Multi Room Audio Matrix Switcher
8
5.0 Rear Panel Connections
All connections to the Matrix Switcher are made via the rear panel.
Connectors and indicators are identified in Figure 4 and described in
Table 1.
Only use F 3,15A L 250V fuse
OPTICAL
OUT IN
ZONE 8ZONE 7ZONE 6ZONE 5ZONE 4ZONE 3ZONE 2ZONE 1
CAUTION: USE ONLY WITH C-Bus MULTIROOM AUDIO SYSTEM AMPLIFIERS
DIGITAL AUDIO OUT
DIGITAL
AUDIO
IN
SOURCE INPUT
1234L
R
BROADCAST
USB
IR OUT
12
Unit
C-Bus
A
C power input
Power
switch Infrared outputs
Digital optical
output
Digital zone outputs
Digital optical
input
Mono broadcast
inputs
Stereo analo
g
ue inputs
Mono level
adjustment
C-Bus
USB
C-Bus
indicators
Digital audio input
Figure 4 – Matrix Switcher rear panel connectors and indicators
Connection
/Indicator
Description
Power switch Switches the mains power input on and off.
Mains power
input (IEC)
Connect mains here to power the Matrix Switcher.
Since the Matrix Switcher provides power to
connected Amplifiers, this connection also affects
Amplifiers which do not have an external power
supply.
Infrared outputs
(×2)
Use these 3.5 mm sockets to connect to IR Emitter
Leads. IR Emitters can be coupled to IR receivers on
equipment, providing remote control from any zone
through the Multi Room Audio system.