Instruction manual

Installation Instructions
53
11.0 Unit Connections
11.1 Distribution Unit
A
UDIO R
A
UDIO L
DC 24V
INPUT
POWER
IR
DIGITAL
AUDIO
OUTPUT
analogue audio inputs
Power
Supply
input
Note:
When connecting a Distribution Unit to an Amplifier which has a Power
Supply (PS) connected, it is not necessary to connect a PS to the
Distribution Unit.
IR emitter output
digital audio output
power indicator
Figure 53 – Distribution Unit connections and indicator
Connection
/Indicator
Description
Analogue audio
inputs
The line level stereo analogue audio connection.
IR emitter output This 3.5 mm socket connects to an IR Emitter Lead.
IR Emitters can be coupled to IR receivers on
equipment, providing remote control from any zone
through the Multi Room Audio system.
Power Supply
input
The 24 V DC Distribution Unit Power Supply
connection. This is used when connecting the
Distribution Unit to a Matrix Switcher. The Power
Supply not required when the digital audio output is
connected to the digital audio input of an Amplifier.