Instruction manual

Installation Instructions
55
LR
EXTERNAL
POWER
OPTICAL
IN
ZONE
OUT
LOCAL
IN
L
R
Unit
DIGITAL
AUDIO OUT
DIGITAL
AUDIO IN
TARGET
IR
Speaker outputs
External power
input
Infrared input
Digital audio output
Di
g
ital optical input
Local inputs
C-Bus
C-Bus
indicators
Digital audio (zone) input Zone outputs
Power LE
D
Figure 55 – Remote Amplifier rear panel connections and indicators
Connection
/Indicator
Description
Speaker outputs
These are used to connect to 4 Ω to 8 Ω speakers
which are rated at 25 W RMS @ 4 Ω (or 6 W RMS @
4 Ω if no external power supply is connected to the
Amplifier).
Digital audio
(zone) input
The zone output of the Matrix Switcher is connected
to this input. Alternatively a Multi Room Audio
Distribution Unit can be connected to this input,
providing one stereo audio input. In this mode, the
Amplifier can select between two audio sources:
Digital audio input and local input.
Zone outputs
(1 × RCA pair)
These are line level outputs of the selected audio
source as received by the Amplifier. The outputs are
affected by the volume, bass and treble settings of
the Amplifier.
Local inputs
(1 × RCA pair)
Use this to Connect a local analogue audio source
which is available to this Amplifier only.