Instruction manual

Installation Instructions
59
Connection
/Indicator
Description
Stereo analogue
inputs
(4× RCA pairs)
Connect up to four stereo analogue inputs to be
distributed to any of the eight zones.
Mono level
adjustment (×2)
These adjust the level of the audio source
connected to the mono broadcast inputs. Use a
small flat head screwdriver to rotate the control if
the audio source is too quiet or loud.
C-Bus indicators
Unit
On: C-Bus network connected
Flashing: Data exchange in progress
C-Bus
On: C-Bus network operational
Off: Insufficient C-Bus power or clock
Flashing: Insufficient C-Bus power
Table 3 – Matrix Switcher connectors and indicators