Instruction manual

Multi Room Audio Matrix Switcher
10
Connection
/Indicator
Description
Stereo analogue
inputs
(4× RCA pairs)
Connect up to four stereo analogue inputs to be
distributed to any of the eight zones.
Mono level
adjustment (×2)
These adjust the level of the audio source
connected to the mono broadcast inputs. Use a
small flat head screwdriver to rotate the control if
the audio source is too quiet or loud.
C-Bus indicators
Unit
On: C-Bus network connected
Flashing: Data exchange in progress
C-Bus
On: C-Bus network operational
Off: Insufficient C-Bus power or clock
Flashing: Insufficient C-Bus power
Table 1 – Matrix Switcher connectors and indicators
6.0 Care Instructions
The Matrix Switcher contains electrical and electronic parts. Note the
following precautions:
• Clean using a soft lint free cloth.
• Do not use chemicals or spray cleaners when cleaning.
• Do not operate with wet hands.
• Do not use hard, sharp objects to select the controls.
• Allow adequate ventilation. Do not cover the unit.
• The Matrix Switcher is designed for indoor use only.
• Keep the unit away from water and other liquids.
• Do not expose the unit to high temperatures.