Instruction manual

C-Bus Multi Room Audio System
560011 – Audio Distribution Unit
The C-Bus Audio Distribution Unit is an optional device, which can be used
with the C-Bus Multi Room Audio System to further enhance Clipsal’s cost
effective audio product family.
The C-Bus Audio Distribution Unit distributes a single digitised stereo audio
input source to multiple locations via amplifiers wired in a parallel format
(using RJ45 double adaptors, Cat. No. 5600TEE). Functions such as
Volume, Bass, Treble and Balance can be adjusted from a C-Bus input
device at any of the audio output locations.
Typical Wiring Diagram
AUDIO R AUDIO L
DC 24V
INPUT
POWER
IR
DIGITAL
AUDIO
OUTPUT
Local
audio
input
PSU PSU PSU
Analogue
A
udio L/R
POWER
MUTE
Multi Room Audio Amplifiers
Distr’n Unit
DIn P DIn P DIn P
DIn – Digital Audio In
LIn – Local In
P – Power input
Notes:
A
udio inputs are stereo.
Do not connect a Power Supply to the Distribution Unit
when it is connected to an Amplifier’s Digital Input. In this
configuration, the Distribution Unit receives its power
from the Amplifier.
LInDOut
Note 1: An Audio Distribution Unit power supply must be used when the Audio
Distribution Unit is connected to a Multi Room Audio Matrix Switcher. A power
supply (Cat. No. 5600P24/500AU) is not supplied with the Audio Distribution Unit.