Instruction manual

MARPA Software
Intermediate 3 C-Bus Training Course
4
1.0 Introduction
The Matrix Switcher is Part of the Multi Room Audio system. The Multi Room Audio Rapid
Programming Application (MARPA) is used to configure the Matrix Switcher. The purpose of
this manual is to set up a basic configuration of the Matrix switcher. For program ming of the
amplifierpleaserefertotheprogrammingAmplifierstrainingmanual.
It
isexpectedthattheuserofthismanualhasagoodunderstandingofC‐Busprogramming.

2.0 Opening the Software
OpenthesoftwarebyselectingtheStartMenu/Clipsal/MARPAasperFigure1.


Figure 1