Instruction manual

MARPA Software
Intermediate 3 C-Bus Training Course
7
4.0 General
The first screen to appear is the general screen as per Figure 5. In this screen you can set the
Generaloptionsofthematrixswitcher.


Figure 5

4.1 MRA Matrix Switcher Number
It is possible  to have three matrix switchers on a network. If more than one switcher is on the
networkyouneedtoassigntheswitcheranumber.Bydefaultthematrixswitchernumberisset
tonumberOne.

4.2 Enable Front Panel Status LED
Onthefrontofthe matrix switcher atthetopleft side
thereisablueledwhichcanbeenabled
whenthematrixswitcherispowered.TheLEDisenabledbydefault.