Instruction manual

MARPA Software

Intermediate 3 C-Bus Training Course

ActionSelector

Theactionselectorisalevelwithin  a group address. Thereare255 levels available within each

groupaddress.Theactionlevelisusedasatriggerpointofanevent.

Forthisexampleyouwill addanaction selectorandcall it DVDPlayas perFigure9.You will

addtheIRCommandsintheC‐BusIRmapssection.



Figure 9

5.5 Dynamic 2 Configuration

ThesetupoftheDynamic2optionissetupthesameasthedynamic1option.

ForthisexamplethedescriptionofDynamic2willbenext.Thetriggergroupwillbethesameas

Dynamic1.TheActionSelectorwillbeDVDNextasperFigure10.



Figure 10