Instruction manual

MARPA Software

Intermediate 3 C-Bus Training Course

For every source other than the Local source, the Dynamic 1 & 2 buttons have the ability to

trigger a different event. When an amplifier has selected a source, the dynamic 1 & 2  buttons 

whenpressedwilltriggertheeventsprogrammedforthatsource.



5.6 Digital and Optical Source

The digital source is a Cat‐5 input and is used to add the sing

le channel distributor or another

digitalsourcetothesystem.

TheOptical sourceisused toaddanoptical inputtothesystem.Theoptical sourcealsohasan 

opticaloutforcascadingtheopticalsourceintoasurroundsoundamplifieroranyothersimilar

device.

Thedigitalandopticalsourcesareconfig

uredthesamewayastheanaloguesources.

NowthatyouhavesetuptheTriggergroupandactionselectorforSource1youneedtoaddthe

learntIRDevicestotheMARPAproject.

6.0 IR Library

SelecttheIRLibraryoptionasperFigure11.



Figure 11

IR Library