Instruction manual

Infrared Reader
Intermediate 3 C-Bus Training Course
9
3.0 Infrared Reader Software
To run the Infrared Reader software click on the Windows Start button  and navigate to the
Clipsal folder. Inside the Clipsal folder there will be another folder called IR Reader, which
containstheexecutablefiletoruntheInfraredReaderSoftware.

3.1 Software Configuration
OncetheInfraredSoftwareisrunning,thescreen
showninFigure3willappear.


Figure 3 – The Infrared Reader Software
Connect the supplied USB cable supplied to the PC and Infrared Reader. Once the Infrared
Readerhasbeensuccessfullyinstalled,theUSBOKLEDonthedevicewillillum inate.