Instruction manual

Infrared Reader
Intermediate 3 C-Bus Training Course
16
Tolearnaninfraredcommandfromanotherremotecontrolfollowthefivestepprocedurelisted
inTable4.

Step 1
Click on the Add icon on the Get Button Template page.
Step 2
The window in Figure 11 will appear. Enter the name of the remote control button you
are learning into the Name field.
Step 3
Point the infrared port of the remote control at the target of the Infrared Reader.
Step 4
Press the Learn button in Figure 11, and press the button on the remote control that
you want the Infrared Reader to learn.
Step 5
Press the save button and the learnt infrared command will be added to the template.
Table 4 – Learning infrared commands


Figure 11 – Allows labelling the button and learning the infrared code
Oncetheinfrared commandhasbeenlearnt andsaved,itwillbestoredin a listfortheremote
controltemplate,asdisplayedinFigure11.


Figure 12 – An infrared code that has been successfully learned.