Instruction manual

Infrared Reader
Intermediate 3 C-Bus Training Course
17
Another option would be to enter the button names only (and not learn the infrared
codes)intheEditButtonscreeninfigure10.Thiswillallowyoutolearnthecommandat
alaterstageasshowninFigure12.

LearnButtons

Figure12showsthewizardonceallofthecommandshavebeenlearnedforthespecificremote
control.


Figure 13 – A list of learnt infrared codes to the created template
The learn buttons page of the wizard is another method of learning infrared commands to the
selected button used in the defined button template. Table 5 displays the available options for
learninginfraredcodes.

Learn All
Will sequentially go through all the buttons in the template and learn all the
corresponding commands.
Edit
Allows the user to change the name of the selected button and learn the infrared
code.
Learn
Allows the user to learn the infrared code of the selected button.
Add
Allows the user to add a new button to the template and learn the corresponding
infrared code.
Delete
Allows the user to delete a button from the template.
Table 5 – Options for learning infrared codes