Instruction manual

Programming Amplifiers
Intermediate 3 C-Bus Training Course
4
Overview
ThismanualispartoftheIntermediate3TrainingCourse.Itisdesignedtogivetheusera guid e
onhowtoprogramamultiroomsystem.ThismanualcoverstheprogrammingoftheAmplifier
range.ThemanualalsocoversthecontroloftheamplifierviaaC‐Businputunit.

Requirements of attending
 the Intermediate 3 course are as follows. The attendee must have
attended a C‐Bus basic and Intermediate 1 course. Attendees must be able to scan the C‐Bus
networkandmakechangeswithoutassistance.


1.0 Starting a New Project
ThesoftwarerequiredfortheprogrammingoftheAmplifiersistheToolkitsoftwareversion1.2
orhigher.Toopenthesoftwareselectthestartmenu/clipsal/C‐Bustoolkit


1.1 Creating a New Project
StartanewC‐BusprojectcalledMRA
