Instruction manual

Programming Amplifiers
Intermediate 3 C-Bus Training Course
8
Assign a group addresses to each of the options under C‐Bus control. They should be given
descriptions that are easy to follow and relevant to the zone you are connected to, eg Zone1
Volume,Zone3NextSrc.Asperfigure4

Figure 4
The ‘More’ button in the C‐Bus Control tab of the amplifier GUI gives you some options that
helpreducetheprocessingtimeofanamplifierandtheDLT’sthatareassociatedwithitonthe
network.

1.5 Audio Levels
The‘AudioLevels’tabintheGUIoftheAmplifieriswherethingslikeVolume,Bass,Trebleand
Balancecanbeadjustedwhenyouareconnectedtothenetwork.Fromhereyoualsohavesome
optionstoactivate/deactivateHighPriorityBroadcastingandtosettheamplifierasamasteror
a
slave.Ifmult
ipleamplifiersarebeingusedontheonezonetrytomakesurethatdesktopamps
stayasmasters,astheylosemostoftheirfunctionalityotherwiseunliketheremoteamp.