Instruction manual

Programming Amplifiers

Intermediate 3 C-Bus Training Course



3.2 Bass and Treble Levels Using One Button

IfyouareusingonebuttontocontroltheBassorTreblefunctionsonaDLTyoumaywantthe

levelspre‐setat50%.TodothisgotothekeyfunctionstabintheDLTandsetthecorresponding

keystothosehighlightedinthefigurebelow.

The Recall 1 level also needs to be set for this function to work properly. This is done in the

BlockstabontheDLTGUIasshownbelow.Oncethesestepshavebeencompletedashortpress

onthebassortreblekeywillsetthelevelto50%

alongpresswillrampthebassortreblelevel

upordownjustlikeatoggledimmer.Thiscanalsobedonetogiveyouapre‐

setvolumeonan

amplifierwithashortpress.