Instruction manual

Programming Amplifiers
Intermediate 3 C-Bus Training Course
16
3.4 Basic Touch Screen Options
Touchscreens,betheyblackandwhiteorcolour,giveyouthemostcontroloveraMultiRoom
Audio system.Pagesthatarededicatedjust toanMRAsystem canbesetup and allow youto
control everything from speaker balance to CD Skip. Multi Room Audio products can be
incorpor
atedintoscenestosetanevenhigherintensitymood.TheC‐Buscommandsusedona
touchscreenarethesameasthoseona Keyunit.
TheimagebelowisofaTouchScreenpagethatiscontrollinganaudiosourceonaMultiRoom
Audionetwork.The
sourceisaCDplayerandtheMatrixSwit
cherhasbeenprogrammedwith
theIRcodesto controltheCDplayer. ThedifferentbuttonsonthepagehaveanOn/OffC‐Bus
function.
AbsolutesourcesareafeatureoftheMultiRoomAudiosystemthatallowsyoutodirectly select
a source instead of cyclin
g through the sources. Thisisshown below. Each of the four buttons
that select a source all have the same group address. They are all set as presets with different
levels.‘CDPlayer’isAnalogue1andissetto2%,‘DVD’isAnalogue2andissetto3%etc.