Instruction manual

Multi Room Audio System
14
5.4 Speaker Cabling
Depending on the installation, speakers may be mounted on a wall using
brackets, or flush mounted on a wall or ceiling. When speakers are
mounted on brackets, it is recommended that an RCA wall plate is installed
adjacent to each speaker.
Spring-release or screw binding post wall plates are used to connect to
speaker outputs of the Amplifiers.
Use low impedance speaker cable to connect the binding post (Amplifier)
wall plates to the RCA (speaker) wall plates. This is especially important
with long cable runs.
Figure 8 illustrates how an RCA wall plate is used
to connect a speaker.
This is ideal for speakers which have been mounted on walls using
brackets, as in the example installation in
Figure 9.
Figure 8 – An RCA wall plate makes a practical speaker connection point