Instruction manual

Installation Instructions
25
6.0 C-Bus System Clock
The Multi Room Audio Matrix Switcher and Amplifiers incorporate a
software selectable C-Bus system clock. The system clock is used to
synchronise data communication over a C-Bus network. At least one active
C-Bus system clock is required on each C-Bus network for successful
communication. No more than three units on any C-Bus network should
have clock circuitry enabled, so this option is normally disabled using the
C-Bus Toolkit software.
If a system clock is required, it can be enabled when editing the unit in the
C-Bus Toolkit software.
7.0 C-Bus Network Burden
The Multi Room Audio Matrix Switcher and Amplifiers incorporate a
software selectable network burden. The network burden can be enabled
when editing the unit in the C-Bus Toolkit software, but only if the C-Bus
system clock is also enabled.
One network burden is normally required to ensure correct operation of
each C-Bus network. The Network window of a C-Bus Toolkit project
provides a summary of a C-Bus network according to the units added to
the Database. This can be helpful in determining how many burdens are
required on a particular network.