Instruction manual

Multi Room Audio Matrix Switcher
6
Only use F 3,15A L 250V fuse
OPTICAL
OUT IN
ZONE 8 ZONE 7 ZONE 6 ZONE 5 ZONE 4 ZONE 3 ZONE 2 ZONE 1
CAUTION: USE ONLY WITH C-Bus MULTIROOM AUDIO SYSTEM AMPLIFIERS
DIGITAL AUDIO OUT
DIGITAL
AUDIO
IN
SOURCE INPUT
1234L
R
BROADCAST
USB
IR OUT
12
Unit
C-Bus
Digita
l
audio C-Bus
Figure 1 – Never plug a C-Bus cable into a digital audio socket or vice versa
3.0 Using the Matrix Switcher
This section describes how to use a Matrix Switcher which has been
installed as part of a Multi Room Audio system. Installation details are
provided in the Multi Room Audio System Installation Manual.
3.1 Powering the Unit
The Matrix Switcher must be plugged into an AC mains power outlet, via
the supplied IEC type cable. A switch is located next to the AC power
socket at the rear of the unit. Push the top of the switch inwards to turn
the Matrix Switcher on.
3.2 Front Panel Control
The front panel of the Matrix Switcher (shown in Figure 2) has eight
buttons which are used to view and control the status of each zone.
Power indicator
Zone
s
election button
s
12345678
ZONES
LCD
Figure 2 – Matrix Switcher front panel