Product Overview

ManualsBrandsSchneider Electric ManualsContactors3 Pole Easy TeSys DPE IEC Contactor (3HP, 9A, 24 VDC, 480V)

Mounting support Rail

Plate

Connections - terminals Power circuit screw clamp terminals 1 flexible without cable end

Power circuit screw clamp terminals 1 0.00…0.01in² (1…4mm²) flexible without

cable end

Power circuit screw clamp terminals 2 flexible without cable end

Power circuit screw clamp terminals 2 0.00…0.01in² (1…4mm²) flexible without

cable end

Power circuit screw clamp terminals 1 flexible with cable end

Power circuit screw clamp terminals 1 0.00…0.01in² (1…4mm²) flexible with

cable end

Power circuit screw clamp terminals 2 flexible with cable end

Power circuit screw clamp terminals 2 0.00…0.00in² (1…2.5mm²) flexible with

cable end

Power circuit screw clamp terminals 1 solid without cable end

Power circuit screw clamp terminals 1 0.00…0.01in² (1…4mm²) solid without

cable end

Power circuit screw clamp terminals 2 solid without cable end

Power circuit screw clamp terminals 2 0.00…0.01in² (1…4mm²) solid without

cable end

Control circuit screw clamp terminals 1 flexible without cable end

Control circuit screw clamp terminals 1 0.00…0.01in² (1…4mm²) flexible without

cable end

Control circuit screw clamp terminals 2 flexible without cable end

Control circuit screw clamp terminals 2 0.00…0.01in² (1…4mm²) flexible without

cable end

Control circuit screw clamp terminals 1 flexible with cable end

Control circuit screw clamp terminals 1 0.00…0.01in² (1…4mm²) flexible with

cable end

Control circuit screw clamp terminals 2 flexible with cable end

Control circuit screw clamp terminals 2 0.00…0.00in² (1…2.5mm²) flexible with

cable end

Control circuit screw clamp terminals 1 solid without cable end

Control circuit screw clamp terminals 1 0.00…0.01in² (1…4mm²) solid without

cable end

Control circuit screw clamp terminals 2 solid without cable end

Control circuit screw clamp terminals 2 0.00…0.01in² (1…4mm²) solid without

cable end

Tightening torque Power circuit: 1.7N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm

Power circuit: 1.7N.m - on screw clamp terminals - with screwdriver Philips No 2

Control circuit 15.05lbf.in (1.7N.m) screw clamp terminals flat Ø 6 mm

Control circuit 15.05lbf.in (1.7N.m) screw clamp terminals Philips No 2

Operating time 65.45...88.55 ms closing

20...30 ms opening

Safety reliability level B10d = 1369863cycles contactor with nominal load conforming to EN/ISO

13849-1

B10d = 20000000cycles contactor with mechanical load conforming to EN/ISO

13849-1

Mechanical durability 10Mcycles

Maximum operating rate 3600cyc/h 140°F (60°C)

Coil technology Without built-in suppressor module

Control circuit voltage limits Drop-out 0.1...0.3 Uc

Drop-out 0.1...0.3 Uc 158°F (70°C))

Operational 0.8...1.25 Uc

Operational 0.8...1.25 Uc 140°F (60°C))

Operational 1...1.25 Uc

Operational 1...1.25 Uc 158°F (70°C))

Inrush power in W 2.4W 68°F (20°C))

Hold-in power consumption in W 2.4W 68°F (20°C)

Auxiliary contacts type Mechanically linked 1 NO IEC 60947-5-1

Signalling circuit frequency 25...400 Hz

Minimum switching current 5mA signalling circuit

Minimum switching voltage 17V signalling circuit

Non-overlap time 1.5Ms on de-energisation between NC and NO contact

1.5ms on energisation between NC and NO contact

Insulation resistance > 10 MOhm signalling circuit

Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz)

Vibrations contactor closed 4 Gn, 5...300 Hz)

Shocks contactor open 10 Gn for 11 ms)

Shocks contactor closed 15 Gn for 11 ms)

Height 3.03in (77mm)

Width 1.77in (45mm)