Installation Guide

Installation 990–91479 Release date: 02/2021
Easy Rack Single Mounting Bracket Kit
ER7PDUBRKTS
Kit Instructions
The Single Mounting Brackets are used to mount a Rack PDU or other equipment
to the vertical mounting rails inside the rack. The location of the Mounting Brackets
depends on the equipment you want to install. The Mounting Brackets have cut
outs to accommodate the toolless mounting pegs of a Rack PDU.
ER7PDUBRKTS Inventory Tools required (not provided)
Single PDU Bracket
(2 Left and 2 Right)
Torx® wrench
M6 x 12 Pan Head T30 Screw (40)
Cage nut tool
Caged Nut M6 14/16 SWG (40)
Proper location in the rack for the cage nuts:
1. Locate the top and bottom U space on the
vertical mounting rails. Every third hole on
the mounting rails is numbered to indicate
the middle of a U space.
2. Install the cage nuts on the interior of the
vertical mounting rail; then install the shelf.
1U
7
6
5
ns0014a
APC by Schneider Electric
70 Mechanic Street
02035 Foxboro, MA
USA
www.apc.com
As standards, specifications, and design
change from time to time, please ask for
confirmation of the information given in this
publication.
© – 2021
APC by Schneider Electric. All rights
reserved.