Installation Guide

ENGLISH

Disable Local Control

The Task Buttons and Scroll Wheel on the thermostat can be disabled to prevent anyone from

controlling the thermostat locally.

To disable the Task Buttons and Scroll Wheel:

1. Remove the thermostat face from the thermostat base.

2. Remove the local control jumper. See Figure 11.

3. Align the tabs of the thermostat face with the slots of the thermostat base. Gently push the

thermostat face into the thermostat base, locking it into place.

Setup and Configuration

Time and Date

The time and date are automatically set from the ZigBee

network or can be set manually if there is no

network connection. See the User’s Guide, document S1B14479.

Installation Settings

This section describes the items that the installer must setup as part of the thermostat installation. The

Installation Settings menu is used to configure the operating parameters of the thermostat.

To access Installation Settings:

1. From the Home screen, press and hold the Scroll Wheel for 3 seconds.

2. Highlight “Setup” and press [OK] or the Scroll Wheel.

3. Press and hold the left two buttons and the Scroll Wheel simultaneously.

Figure 11: Local Control Jumper

COMM JUMPER

65A01 – Rev

TO DISABLE TASK BUTTONS

AND SCROLL WHEEL

REMOVE JUMPER.