Use and Care Manual

16-English
From the Temperature screen, press [More] to access the Menu screen, then select Mode.
MODE
Ok NextCancel
Mode: Auto
• Auto mode: The thermostat instructs the HVAC system to heat or
cool the premises based on the current temperature and
programmed high and low temperature setpoints.
• EM Heat mode: Available only when the thermostat is in heat
pump mode. If the heat pump is not able to attain the programmed
heat setpoint, the thermostat turns on the electric heat.
• Off mode: The thermostat does not send commands to the HVAC
system. The HVAC system is turned off.
• Heat mode: The thermostat instructs the HVAC system to heat the
premises as determined by the setpoint. Cooling setpoints will be
ignored, and the cooling system will not operate.
• Cool mode: The thermostat instructs the HVAC system to cool the
premises as determined by the setpoint. Heating setpoints will be
ignored, and the heating system will not operate.
Turn the Scroll Wheel or press [Next] to scroll through the
mode choices.
Press [Ok] to confirm the choice and return to the Menu
screen.
Press [Cancel] to discard the changes and return to the
Menu screen. Press [Cancel] twice to discard the changes
and return to the Temperature screen.
Setting the Thermostat Mode