Use and Care Manual

40-English
To modify or create a load control schedule, select Program Setup from the Options screen. Then select
the day of the week you want to configure.
• Time is increased and decreased in 15 minute increments.
• To disable a period, set it to the same time as the period before it.
Turn the Scroll Wheel to set the Time for the
corresponding time of day. This setting defines when the
time of day starts and the previous time of day ends.
Press [Change] to change the value of the highlighted
field, as an alternative to the scroll wheel.
MORNING
The time you typically wake in the morning, along with the load status settings that will remain
until you leave your home for the day.
DAY
The time you leave your home for the day, along with the load status settings that will remain
until you return home in the evening.
EVENING
The time you return home in the evening, along with the load status settings that will remain until
you go to bed at night.
NIGHT
The time you go to bed at night, along with the load status settings that will remain until you
awake the next morning.
Press the Scroll Wheel to highlight the Status setting. Continued on next page
Change NextOk
Time
6:00AM
8:00AM
6:00PM
10:00PM
Status
On
40 %
Off
On
Morning
Day
Evening
Night
Monday
Creating Load Control Programs