Use and Care Manual

41-English
Turn the Scroll Wheel to adjust the Status setting that the
load will maintain for the selected time of day.
When the desired Status setting is displayed for the
selected period, press the Scroll Wheel or [Next] to
highlight the time for the next time of day period.
When the Time and Status settings for each time of day
period are complete, press [Ok] to save the changes and
return to the Options screen OR
Press [Next] to program the next day.
Change NextOk
Time
6:00AM
8:00AM
6:00PM
10:00PM
Status
On
40 %
Off
On
Morning
Day
Evening
Night
Monday
The Time setting defines when the time of day period starts and the
previous time of day period ends. Press [Change] to set the time for
the corresponding time of day period in 15 minute increments, then
press [Ok] to confirm the time setting.
Press [Next] to tab to the Status field. This setting determines
whether the load is turned on or off for the corresponding time of day.
You can also set the load to be on for a certain percentage of the
selected time increment. In the image to the left, that would be
40% ON for the 8 am to 6 pm time block.
Press [Change] to change the load on/off status, then press [Ok] to
confirm the setting.
NOTE: To copy to other days, select [Yes]
when prompted.
Creating Load Control Programs