Installation manual

InRow RC Installation Manual6
General Information
Inspecting the Equipment
Your Schneider Electric InRow RC Full Rack air conditioner has been tested and inspected for quality
assurance before shipment from Schneider Electric. Carefully inspect both the exterior and interior of the
equipment immediately upon receipt to ensure that the equipment has not been damaged during transit.
Verify that all parts ordered were received as specified and that the equipment is the correct type, size and
voltage.
Filing a claim: If damage is identified on receipt of the equipment, note the damage on the bill of lading and file
a damage claim with the shipping company. Contact Schneider Electric Worldwide Customer Support at one of
the numbers listed on the back page of this manual for information on how to file a claim with the shipping
company. The shipping claim must be filed at the receiving end of the delivery.
NOTE: In case of shipping damage, do not operate the equipment. Keep all packaging for inspection by the
shipping company and contact Schneider Electric.
Storing the Equipment Before Installation
If the equipment will not be installed immediately, store it in a safe place, protected from the weather.
Moving the Equipment
Moving the equipment to its final location
The recommended tools for moving the equipment while it is still on the pallet include the following:
NOTE: The equipment can be rolled to its final location using its casters if the floor is smooth and clean.
NOTICE
HAZARD TO EQUIPMENT
Leaving the equipment uncovered and exposed to possible damage from the
environment will void the factory warranty.
Failure to follow these instructions can result in equipment damage.
Pallet Jack Forklift