Specifications

The STB NIB 2212 NIM Module
42
31004624 8/2009
Module Specifications
Overview
The following information describes the general specifications for the NIM.
Specifications Detail
The following table lists the system specifications for the STB NIB 2212 INTERBUS
NIM:
General Specifications
dimensions width 40.5 mm (1.59 in)
height 130 mm (5.12 in)
depth 70 mm (3.15 in)
interface connectors from INTERBUS network nine-pin SUB-D connector (male)
to INTERBUS network nine-pin SUB-D connector (female)
RS-232 port for configuration
software or HMI panel
8-receptacle HE-13
to external 24 VDC power supply 2-receptacle
built-in power supply input voltage 24 VDC nominal
input power range 19.2 ... 30 VDC
input current 400 mA @ 24 VDC
output voltage to island bus 5 VDC @ 1.2 A
output current rating 5 VDC @ 1.2 A
isolation no internal isolation (isolation must be provided by a
SELV-rated external 24 VDC source power supply)
noise immunity (EMC) EN 61131-2
addressable I/O
modules supported
per segment 16 maximum
per island 32 maximum
segments supported primary (required) one
extension (optional) six maximum
standards INTERBUS conformance INTERBUS Club (www.ibsclub.com)
MTBF 200,000 hours GB (ground benign)
storage temperature -40 to 85° C
operating temperature range* 0 to 60° C
agency certifications refer to the Advantys STB System Planning and
Installation Guide, 890 USE 171 00
*This product supports operation at normal and extended temperature ranges. Refer to the Advantys STB System
Planning and Installation Guide, 890 USE 171 00 for a complete summary of cabalities and limitations.