Manualshelf

Data Sheet

ManualsBrandsSCHNEIDER ELECTRIC ManualsContactorsContactor 1 pc(s) 1 m
1234
Product data sheet
Characteristics
LC1D25BD
TeSys D contactor - 3P(3 NO) - AC-3 - <= 440
V 25 A - 24 V DC coil
Main
Range of product TeSys D
Range TeSys
Product name TeSys D
Product or component-
type
Contactor
Device short name LC1D
Contactor application Motor control
Resistive load
Utilisation category AC-1
AC-3
AC-4
Poles description 3P
Pole contact composi-
tion
3 NO
[Ue] rated operational-
voltage
<= 300 V DC for power circuit
<= 690 V AC 25...400 Hz for power circuit
[Ie] rated operational-
current
25 A (<= 60 °C) at <= 440 V AC AC-3 for power cir-
cuit
40 A (<= 60 °C) at <= 440 V AC AC-1 for power cir-
cuit
Motor power kW 11 kW at 380...400 V AC 50/60 Hz AC-3
15 kW at 500 V AC 50/60 Hz AC-3
15 kW at 660...690 V AC 50/60 Hz AC-3
5.5 kW at 220...230 V AC 50/60 Hz AC-3
11 kW at 415...440 V AC 50/60 Hz AC-3
5.5 kW at 400 V AC 50/60 Hz AC-4
Motor power hp 2 hp at 115 V AC 50/60 Hz for 1 phase motors
7.5 hp at 200/208 V AC 50/60 Hz for 3 phases mo-
tors
3 hp at 230/240 V AC 50/60 Hz for 1 phase motors
7.5 hp at 230/240 V AC 50/60 Hz for 3 phases mo-
tors
15 hp at 460/480 V AC 50/60 Hz for 3 phases mo-
tors
20 hp at 575/600 V AC 50/60 Hz for 3 phases mo-
tors
Control circuit type DC standard
[Uc] control circuit volt-
age
24 V DC
Auxiliary contact com-
position
1 NO + 1 NC
[Uimp] rated impulse-
withstand voltage
6 kV conforming to IEC 60947
Overvoltage category III
[Ith] conventional-
free air thermal current
40 A at <= 60 °C for power circuit
10 A at <= 60 °C for signalling circuit
Irms rated making ca-
pacity
450 A at 440 V for power circuit conforming-
to IEC 60947
140 A AC for signalling circuit conforming-
to IEC 60947-5-1
250 A DC for signalling circuit conforming-
to IEC 60947-5-1
Rated breaking capacity 450 A at 440 V for power circuit conforming-
to IEC 60947
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Jun 15, 2018
1

Summary of content (4 pages)