Specifications

2/32
Industrial PCs
Magelis
®
Flex PC BOX
Introduction
Magelis
®
Flex PC BOX CPUs
Introduction
Magelis
®
Flex PC BOX high-end CPUs are designed to respond to the most
rigorous, demanding industrial applications requiring optimum processor power and
PCI card expansion.
Magelis Flex PC BOX F: MPC FN0 pppX 00p, with 2 PCI card slots
Magelis Flex PC BOX H: MPC HN0 pppX 00p, with 4 PCI card slots.
Two Magelis
®
Flex PC BOX families are available. A General Purpose version for
standard industrial environments, and a Heavy Duty version for industrial
environments where harsher conditions prevail.
b General Purpose with hard disk ≥ 160 GB, two processor levels and basic RAM
that can be expanded to 2 GB.
v Intel
®
Celeron
®
M 1.86 GHz processor, standard memory: 512 MB
v Core Duo M 2 GHz processor, standard memory: 1024 MB
General Purpose Magelis
®
Flex PC BOX F/H models are available with a c 24 V or
a 100...240 V power supply, in Base Windows XP
®
Edition only.
b Heavy Duty with Core Duo M 2 GHz processor, standard RAM: 1024 MB
expandable to 2 GB, 16 GB Flash Disk in versions:
v “HMI Edition”, featuring pre-installed Vijeo Designer
™
Run Time software.
v “Vijeo
®
Citect
®
Edition” featuring pre-registered Vijeo
®
Citect
®
software.
v “Base Windows XP
®
”.
Heavy Duty Magelis Flex PC BOX F/H CPUs are only available with an a 100...240 V
power supply.
All Magelis
®
Flex PC BOX F/H CPUs can be connected either directly or remotely to
a Magelis Front Panel type at screen or remotely to a Magelis iDisplay at screen,
and feature:
v 2 Ethernet TCP/IP ports with RJ45 connector, one of which is 10/100/1000BASE-T ,
v 4 USB ports (12 Mbps),
v 4 serial COM ports (RS 232),
v 1 DVD-ROM drive (reader), with option of replacement by a CD/DVD drive
(reader/writer) MPC YN0 0CDW 30N.
v 1 RAS port.
1 DVI-I video port with RGB support, making it possible to connect a Magelis
®
iDisplay screen in addition to the main Magelis Front Panel, for example.
System Monitor
The System Monitor function featured in Flex PC BOX F/H CPUs enables the
monitoring of several parameters or system functions:
CPU temperature, -
fan speed,-
supply voltages,-
disk, -
back lighting, etc.-
System Monitor controls the handy RAS port in order to signal an alarm (by means of
a digital output), or to initiate a Flex PC BOX restart. Alerts are also signalled in the
form of a pop-up message or a Windows alarm (Event Viewer).
RAID 1 option
The RAID 1 option MPC YN0 0RAI D0N (for General Purpose versions only)
involves conguring a second disk within the system with a mirror image of the rst
disk. This increases the system’s tolerance to disk errors and enables it to function
provided that at least one disk is operational. The defective disk can be replaced
without the need to stop the Flex PC BOX. The option includes a disk cartridge with a
capacity ≥ 80 GB and RAID software for installation.
Flex PC BOX with Battery Backup
The Flex PC BOX equipped with Battery Backup MPC HN0 5NBX 00N (for Flex PC
BOX H only) enables the system to continue operating for about 5 minutes
(depending on the system load) in the event of a power failure. UL 60950 certication
only.
Magelis
®
Flex PC BOX F: MPC FN0 pppX 00p
Magelis
®
Flex PC BOX H: MPC HN0 pppX 00p
Description:
page 2/33
Specications:
pages 2/34 to 2/35
References:
pages 2/41 to 2/42
Dimensions:
pages 2/47
2
3
4
1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com