Specifications

2/7
Industrial PCs
Magelis
®
Smart Embedded Panels
1
3
2
4
Description (continued)
15" touch screen front panel MPC ST5 2NpJ 20p
The touch screen front panel of the Magelis
®
industrial PC MPC ST5 2NpJ 20p
features:
1 15" XGA active matrix color TFT LCD screen (maximum display area 1024 x 768
points) with high denition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), PC switched on,
v DISK (green), accessing IDE bus (accessing Compact Flash memory, etc.).
4 Dust and moisture protected USB port.
Lower and left-hand sides, 15"
Expansion slots and connection elements are accessible from the rear of the PC,
with the following elements located on the lower and left-hand sides:
1 Removable screw terminal block for connecting c 24 V power supply.
2 Slot for the Compact Flash memory card containing the operating system and
integrated software.
3 25-pin female SUB-D connector marked RAS for diagnostics.
4 Two 9-pin male SUB-D connectors marked COM1 and COM2 for the RS 232
serial link.
5 Four USB 2.0 ports.
6 Two RJ45 connectors for Ethernet link:
v 1 x 10/100/1000 Mbps
v 1 x 10/100 Mbps
7 Slot for 2 additional PCMCIA cards.
8 Mini-jack connector for loudspeaker.
Note: AC versions have an On/Off switch.
4 52
81 3 6 7
Introduction:
page 2/4
Architecture:
page 2/5
Specications:
page 2/8
References:
pages 2/9 to 2/10
Dimensions:
page 2/11
2
3
4
1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com