Specifications

2/15
Industrial PCs
Magelis
®
Compact iPC
PC Panels
Description (continued)
15" touch screen front panel MPC KT5 5pAX 20p
The touch screen front panel of the 8.4" industrial PCs MPC KT5 5pAX 20p is comprised of:
1 15" XGA active matrix color TFT LCD screen (maximum display area 1024 x 768
points) with high denition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), PC switched on,
v DISK (green), accessing IDE bus (accessing hard disk memory, etc.).
4 Sealing plate to maintain the IP 65 degree of protection when in place, and when
removed, provides access to:
v USB 2.0 port,
v “Pencil point” RESET button for restarting the processor.
Lower faces, 15"
Expansion slots and connection elements are accessible from the rear of the PC, with
the following elements located on the lower side:
1 Connector for plugging-in the a 100 to 240 V power cable.
2 Two vents, each tted with a dust lter and fan.
3 Slot for additional Compact Flash memory card.
4 Four 9-pin male SUB-D connectors marked COM1, COM2, COM3 and COM4 for
serial links (see details on page 2/16).
5 Four USB 2.0 ports.
6 Slot for 2 additional PCMCIA cards.
7 Two RJ45 connectors for the Ethernet link:
v 1 x 10/100/1000 Mbps
v 1 x 10/100 Mbps
8 Slot for a PCI bus expansion card.
9 DVD drive (reader/writer).
10 3.5" oppy disk drive.
11 VGA port.
Note: AC versions have an On/Off switch.
1
3
2
4
7
6
1
2 3 4 5
8
9
9-10-11
Introduction:
page 2/12
Architecture:
page 2/13
Specications:
pages 2/16 to 2/18
References:
pages 2/19 to 2/21
Dimensions:
page 2/21
2
3
4
1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com