Specifications

110 35010372 10/2010
Part Description
H Key Switch: Turning the key turns ON/OFF the XBT GH unit power supply.
I CF card cover: The CF card socket and DIP switches are located in the CF
card cover (they are accessible when the card cover is open). This cover must
be closed when accessing the CF card (See Location of CF Card DIP
Switches, page 112.)
J Hook: A hook for temporarily hanging the XBT GH unit on a wall.
Note: The following is recommended to be used as pairs for this hook:
z A Φ7 or less, rod-shaped or S-shaped hook.
z M4 pan-head machine screw, which head diameter is Φ7 or less.
z Panel thickness: 1 to 1.6mm [0.04 to 0.06 in.]
z Panel width: 14mm [0.55 in.]
K CF card access lamp:
z Green ON: the CF card is inserted and the cover is closed, or the CF card
is being accessed.
z Green OFF: the CF card is not inserted or is not being accessed.
L Stylus: Use the stylus for entering data to the touch screen interface.
M Hand Strap Attachment Slots (2)
N Insertion hole (with cover) for Function Switch Sheet (2)
O XBT GH Cable Connector (with Connector Cover)
P 3-Position Enable Switch: The switch provides three positions:
z The switch is not pressed (released).
z The switch is pressed to the intermediate position.
z Tthe switch is pressed to the innermost position (fully pressed).
Q Wall Adapter Attachment Slots: To mount the XBT GH unit to a panel or
commercially available arm, attach the dedicated wall-hanging adapter
(optional) to this slot.
R Neck Strap Attachment Slots (4)
S CF card interface: Insert the CF card in this slot.
T LAN status LED: The LED turns ON or OFF to indicate the current status of
the Ethernet transmission interface (10BASE-T/100BASE-TX).
z Green ON: Data transmission available.
z Green Flashing: Data transmission is occurring.
z Green OFF: No connection or subsequent loss of communication.
z Orange ON: Connecting with 100BASE-TX.
z Orange OFF: Connecting with 100BASE-TX or No connection.
U Dip Switches: After inserting a CF Card, be sure to turn ON DIP Switch 4, and
close the CF Card cover before using the GP unit.
For more information, see “CF Card DIP Switches” on page 13.
V USB Host Interface: Complies with USB 1.1. Uses a “TYPE-A” connector.
Power supply voltage: DC5 V±5%, Output current: 500 mA (max).
Connect to the transfer cable, storage device (USB memory, CF Card reader),
etc. Maximum communication distance: 5 m..