Specifications

35010372 10/2010 83
F Ethernet interface (10Base-T/100Base-TX) (except XBT GT2110/2120): RJ-
45 connector is used, and the LED turns ON or OFF to indicate the current
status.
z Green ON: data transmission available.
z Green OFF: no connection or subsequent loss of communication.
z Yellow ON: data transmission is occurring.
z Yellow OFF: no data transmission.
G Power input terminal block: connects the XBT GT power cable’s input and
ground wires to the XBT GT.
H USB interface (USB1.1): connects a data transfer cable or peripherals or PLC
USB terminal port to XBT GT.
I Serial interface COM1: connects a RS-232C or RS422-485 (serial) cable
(from the host/PLC) to the XBT GT (COM1 port).
J Serial interface COM2: connects a RS485 (serial) cable (from the PLC) to the
XBT GT (COM2 port).
K RS485 line polarization selector switch.
L CF card cover: covers the CF card slot. This cover must be closed when
accessing the CF card (except XBT GT2110)(See Location of CF Card DIP
Switches, page 112).
M CF card socket: permits insertion of the CF card.
Part Description