Specifications

96 35010372 10/2010
D Expansion unit interface: connects expansion units with communication
features.
E Ethernet interface (LAN) (10Base-T/100Base-TX): RJ-45 connector is used,
and the LED turns ON or OFF to indicate the current status.
z Green ON: data transmission available.
z Green OFF: no connection or subsequent loss of communication.
z Yellow ON: data transmission is occurring.
z Yellow OFF: no data transmission.
F USB host interface (USB1.1) (x2): connects a data transfer cable, USB-
compatible printer, peripherals, or a PLC USB terminal port to the XBT GT. The
maximum communication distance is 5 m.
G Expansion unit interface (EXT1): connects expansion units with communication
features.
H Expansion unit interface (EXT2): extends a display function
I Auxiliary input/output/voice output interface (AUX): this interface is used for:
z External reset
z Alarm output
z Buzzer output
z Sound output
J Expansion memory interface cover
K CF card access lamp:
z Green ON: the CF card is inserted and the cover is closed, or the CF card is
being accessed.
z Green OFF: the CF card is not inserted or is not being accessed.
L Power plug connector: the power cable is connected through this connector.
M CF card cover : the CF card I/F and DIP switches are located in the CF card
cover (they are accessible when the card cover is open). This cover must be
closed when accessing the CF card (See Location of CF Card DIP Switches,
page 112.)
N Audio input interface (L-IN/MIC): this interface is used to connect a microphone
(use mini jack connector of 3.5 mm) (XBT GT6340 only).
O Video input interface: this interface is used to connect a video camera NTSC
(59.9 Hz)/PAL (50 Hz). Use with the RCA convertor 75 Ω) (XBT GT6340 only).
P Serial interface COM1: connects a RS232C or RS422-485 (serial) cable (from
the host PLC) to the XBT GT (COM1 port).
Q Serial interface COM2: connects a RS485 (serial) cable (from the host PLC) to
the XBT GT (COM2 port).
R RS485 line polarization selector switch
Part Description