Technical information

Managing Online Applications
90
EIO0000000638 04/2012
USB Cables Requirements
To connect the controller to your PC, specific USB cables are required as shown in
the following table:
NOTE:
When mounted on a front panel, use the following cables combinations:
z XBT ZG 935 and XBT ZGUSB
z TCS XCNA MUM3P and XBT ZGUSBB
Connecting with USB Cable
To connect the USB cable to your XBT GT/GK HMI Controller, follow the steps in
the table below:
Product Name Reference Description
USB Transfer Cable XBT ZG 935 Download project data created with the
window Editor via the USB interface from
the XBT GT/GK HMI Controller unit.
USB Front Cable XBT ZGUSB Extension cable attaching USB port to front
panel.
USB Front Cable XBT ZGUSBB Extension cable attaching USB port to front
panel.
USB Programming
Cable
TCS XCNA MUM3P Extension cable attaching USB port to front
panel.
Step Action
1 Connect the USB cable to the XBT GT/GK HMI Controller; check that the USB
holder (see Magelis XBTGC HMI Controller, Hardware Guide)is in the correct
position.
2 Connect your USB cable using the front panel connections (see Magelis
XBTGC HMI Controller, Programming Guide).
3 Connect the USB cable to the PC.