Technical information

Troubleshooting and FAQ
96
EIO0000000638 04/2012
Troubleshooting
Introduction
This section lists the possible troubleshooting solutions with the XBT GT/GK HMI
Controller, and procedures for troubleshooting them.
Transferring the Application is not Possible
Possible causes:
z PC cannot communicate with the controller.
z SoMachine not configured for the current connection.
z Is your application valid?
z Is the CoDeSys gateway running?
z Is the CoDeSys SP win running?
Resolution:
z Refer to Communication between SoMachine and the XBT GT/GK HMI
Controller (see page 96).
z Your application program must be valid. Refer to the debugging section in the
CoDeSys Online-Help.
z The CoDeSys gateway must be running:
a. click the CoDeSys Gateway icon in the task bar,
b. select Start Gateway.
Communication Between SoMachine and the XBT GT/GK HMI Controller is not Possible.
Possible causes:
z SoMachine not configured for the current connection.
z Incorrect cable usage.
z Controller not detected by the PC.
z Communication settings are not correct.
z The controller has detected an error or its firmware is invalid.