Specifications

MBX Bridge Help
Cyberlogic Technologies Inc. - 25 -
The Modbus Plus to Modbus Plus Routing Wizard will open. On the first screen, you
will enter the source parameters for the routing record. The Source Device field
shows the device you selected in the previous step. This is a display-only field.
3. For the Slave Path Filter, select Single Path and then choose 1 as the First Path.
4. In the Modbus Plus Address Filter section, enter an asterisk for each of the three
fields you can edit.
The MB1 and MB2 fields are display-only and already set to a wildcard. This is
because, in the case of Modbus Plus, the first routing byte always specifies the
bridge’s node address, and the second byte always specifies the slave path number.
Therefore no meaningful filtering can be done on these fields.
5. When you finish these entries, click Next > .