Specifications

MBX Bridge Help
Cyberlogic Technologies Inc. - 36 -
Destination Device
Specifies the MBX Device through which the messages will be sent. Select the desired
device from the drop-down list.
IP Address / Mapped Address
This selection allows you to designate whether you wish to specify the destination IP
address here or provide an index (node address) into the IP address mapping table. The
mapping table is configured within the Ethernet device. Refer to the Ethernet MBX Driver
help for more information on configuring this table.
IP Address
Enter the IP address of the destination to which the message should be routed. You must
use the syntax as described in the Destination Routing section.
Destination Index
Specify the destination index for the routed message. Again, you must use the syntax as
described in the Destination Routing section.
Timeout (ms)
Enter the desired reply message timeout in milliseconds.