Specifications

MBX Bridge Help
Cyberlogic Technologies Inc. - 47 -
directory chosen for installation. If you wish to use a file with a different name or in a
different location, you must specify this using Set Active Configuration... .
When you select this item, this dialog box opens. It shows the name and location of the
active file. To select another, click Browse... then locate the desired file and click OK .
Save & Update Bridge
When you make a change to the active configuration file, the changes will not
immediately be applied to the MBX Bridge. To do that, you must select Save & Update
Bridge from this menu or click the Save & Update Bridge button on the toolbar. This
selection performs two functions: it saves the configuration change to the file on the disk
and also applies it to the bridge so that messages will be routed according to the new
configuration.
If you do not want to apply the changes to the bridge, use Save or Save As... instead.
Later, when you want to apply the changes, you can select Save & Update Bridge .
Control Menu
The Control Menu allows you to start and stop the MBX Bridge, either manually or
automatically.
Start Bridge
If the MBX Bridge is not running, selecting this entry will start it.