Specifications

MBX Bridge Help
Cyberlogic Technologies Inc. - 54 -
MBX Bridge Server Event Log Messages
bMBXApiM.DLL failed to load. Reinstall the product.
A necessary DLL could not be loaded. This may indicate a corrupted installation. Repair
the existing installation or remove and reinstall the software.
MBX Bridge server is already running! Server start operation has been
aborted.
The driver could not start because another copy of it is already running.
Cyberlogic MBX Bridge Server (<Version Number>) started.
The driver successfully started. The driver’s version number may be requested if you call
Cyberlogic Tech Support.
Error opening the configuration file (<Config File>).
The driver had trouble opening the configuration file. The most likely reason is that the
configuration file has not been created yet. The MBX Bridge Configuration Editor creates
the configuration file. Because the MBX Bridge can be configured on line, this is not a
fatal error.
No valid bridge records have been specified.
There were no routing records in the configuration file. So, although the MBX Bridge
started, no messages will be transferred.
Unable to initialize global system resources.
The driver was unable to allocate enough memory to start. Close other open applications
or add more memory to the system, and then try to restart the driver.
The bridge received the following error (<Error Number>, <Error Text>)
when it tried to open the log file.
The MBX Bridge was unable to open the log file.
This is a promotional copy of the MBX Bridge. The bridge will operate for
<Number of Hours> hours.
This is a time-limited installation of the software. After the stop time, the driver will not
allow any further I/O operations.
This is a promotional copy of the MBX Bridge. The allowed operation time has
expired. The MBX Bridge is shutting down.
This is a time-limited installation of the software. The stop time has been reached or
exceeded, so the driver will not allow any further I/O operations.