Specifications

1
2
3
4
5
6
7
8
9
10
9
Introduction (continued)
Altivar
®
12
variable speed drives
An optimum solution
The Altivar
®
12 range of variable speed drives extends across a range of motor
power ratings from 0.18 kW to 4 kW on three types of power supply: Two standard
versions are available:
Drive with heatsink for normal environments and fan-cooled enclosure:
v 100 to 120 V single-phase, 0.18 kW to 0.75 kW (ATV12HpppF1)
v 200 to 240 V single-phase, 0.18 kW to 2.2 kW (ATV12HpppM2)
v 200 to 240 V three-phase, 0.18 kW to 4 kW (ATV12HpppM3)
Drive on a base plate for mounting on the machine frame; the frame surface area
should allow heat to dissipate:
v 100 to 120 V single-phase, 0.18 kW to 0.37 kW (ATV12H018F1, P037F1)
v 200 to 240 V single-phase, 0.18 kW to 0.75 kW (ATV12H018M2, PpppM2)
v 200 to 240 V three-phase, 0.18 kW to 4 kW (ATV12H018M3, PpppM3)
Note: The Altivar 12 drive output voltage is 200 to 240 V three-phase, regardless of the type of
drive line supply.
The Altivar 12 drive utilizes standard Modbus communication protocol, and can be
accessed via the RJ45 connector located on the underside of the drive 4.
The entire range conforms to international standards IEC/EN 61800-5-1 and
IEC/EN61800-3,isUL,CSA,C-Tick,NOM,GOSTcertiedandhasbeendeveloped
to meet the requirements of directives regarding the protection of the environment
(RoHS, WEEE) as well as those of European Directives to obtain the e mark.
Electromagnetic compatibility (EMC)
TheintegrationofalevelC1EMClterinATV12ppppM2 drives and the handling of
EMC simplify installation and make it very inexpensive to bring the device into
conformity to obtain the e mark.
ThisEMCltercanbedisconnectedviaaninternalswitch6.
ATV12ppppF1 and ATV12ppppM3drivesaredesignedwithoutanEMClter.Filters
are available as an option and can be installed by the customer to reduce
the level of emissions (see page 16).
External accessories and options
External accessories and options can be used with Altivar 12 drives:
EMC conformity kits, plates for direct mounting on 35 mm DIN rails, etc.
Braking units combined with a braking resistor, motor chokes, additional EMC input
lters,etc.
Dialog and conguration tools
Human/Machine Interface (HMI)
The 4-digit display 1 can be used to display states and faults, access parameters
and modify them via the navigation button 2.
The RUN and STOP buttons 3 can be made accessible on the front panel by removing
the blanking plate 5fromthedoor;theymustbeconguredinordertobeactive.
Simple Loader and Multi-Loader conguration tools
TheSimpleLoadertoolenablesonepowered-updrive'scongurationtobe
duplicated on another powered-up drive.
TheMulti-LoadertoolenablescongurationsfromaPCordrivetobecopiedand
duplicated on another drive; the drives do not need to be powered up.
SoMove
™
setup software
TheSoMovesetupsoftwarecanbeusedwiththeAltivar12driveforconguration,
adjustment,debugging(usingtheOscilloscopefunction)andmaintenance,justasit
can for all other Schneider Electric variable speed drives and starters. It can also be
used to customize the integrated display terminal menus. It can be used with a direct
connection or a Bluetooth
®
wireless connection.
Remote display terminal
The Altivar 12 drive can be connected to a remote display terminal, available as an
option. This terminal can be mounted on an enclosure door with IP 54 or IP 65
degree of protection. The maximum operating temperature is 50°C. It provides
access to the same functions as the Human/Machine Interface.
Specications:
page 10
References:
page 14
Dimensions:
page 18
Connections:
page 22
Functions:
page 26
Drive with heatsink
ATV12H075M2
Drive on base plate
ATV12P075M2
Remote terminal
with cover closed
Remote terminal with cover
open: RUN, FWD/REV and
STOP buttons accessible
3
2
5 4
1
ATV12H075M2 with door on
front panel open
6
Multi-Loader
conguration tool
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com