Network Card User Manual

Network
Management Card
User Manual
Network Management Card
– User Manual 34003676EN/HA
Page
59/81
Same feature than for UPS, without the system shutdown only available for UPS.
For detail see the UPS environment settings.
3.6.4 Log
The environment sensor’s two measurements, Temperature and Humidity, are recorded at an interval defined
by the Environment log interval parameter on the System settings page.
By default, this period is 300 seconds.
Each measurement is dated and stored in the log of the UPS’ communication card.
The size of log files is limited by a time indexing system.
The user can Save the log on his workstation at any time, in a CSV format file.
He can also Clear the files contained in the card to reset the log.