User's Manual

Installation PD100 Partial Discharge Tag
2. Insert the PD100 in the cut-out in the mounting plate by tilting the PD100
slightly.
1
2
2
3. Push slightly the top of the PD100, until you hear a click.
3
4. Check that the two upper mounting clips are in place and that the PD100 is
xed securely on the mounting plate.
5. Check that the gasket is in place.
Wiring
Safety Instructions
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• The PD100 is part of the VDIS system, as dened in IEC 62271-213
standard. Follow all the rules dened in IEC 62271-213 standard.
• The capacitive coupling element value must be compliant with
IEC 62271-213 standard.
• The PD100 wires must be xed to avoid any mechanical stress on the
connectors.
Failure to follow these instructions will result in death or serious injury.
GEX5968601-00 19