Server User Manual

Chapter 4—Connections 63230-216-207/A3

Control Power 9/2002

CONTROL POWER The Power Server accepts 24 Vdc control power with maximum power

consumption of 28 watts. A 50-watt power supply is recommended for this

application (order Square D part no. PS080).

NOTE: Check for proper polarity before applying power to the unit.

Fusing We recommend using one 2 A fast-blow fuse as shown in Figure 4–2 and

Figure 4–3 on page 11.

Grounding The Power Server is connected to ground via the control power ground

connection. Figure 4–2 depicts the recommended grounding method for the

Power Server when used with power supply PS080. If grounding the Power

Server to local equipment, refer to Figure 4–3 on page 11.

NOTE: The control power source must be properly grounded.

Figure 4–2: Power Server grounding to power supply PS080

24 Vdc

100–240 Vac

Source

2 A Fast-Blow Fuse

recommended

Power Server

Power Supply

(PS080)

–

30703007