Datasheet

ManualsBrandsSCHNEIDER ELECTRIC ManualsTime Switches & Multifunction RelaysTDR Monofunctional 1 pc(s) ATT.FX.TIME-RANGE: 0.1 s - 100 h

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

May 7, 2018

Product data sheet

Characteristics

RE17LAMW

on-delay timing relay - 1 s..100 h - 24..240 V AC/

DC - solid state output

Main

Range of product Zelio Time

Product or component type Modular timing relay

Discrete output type Solid state

Width 17.5 mm

Component name RE17L

Time delay type A

Time delay range 0.1...1 s

1...10 s

6...60 min

1...10 min

1...10 h

10...100 h

6...60 s

Nominal output current 0.7 A

Complementary

Control type Selector switch on front panel

[Us] rated supply voltage 24...240 V AC/DC at 50/60 Hz

Voltage range 0.85...1.1 Us

Supply frequency 50...60 Hz (+/- 5 %)

Impulse duration 0.05 s typical

Insulation resistance 100 MOhm at 500 V DC conforming to IEC 60664-1

[Uimp] rated impulse withstand voltage 5 kV (1.2/50 µs)

Delay response < 100 ms

Connections - terminals Screw terminals, clamping capacity: 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12 (solid) without cable

end

Screw terminals, clamping capacity: 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14 (solid) without cable

end

Screw terminals, clamping capacity: 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14 (flexible) with cable end

Screw terminals, clamping capacity: 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16 (flexible) with cable end

Tightening torque 0.6...1 N.m conforming to IEC 60947-1

Summary of content (8 pages)

PAGE 1
RE17LAMW Product data sheet Characteristics Main Range of product Zelio Time Product or component type Modular timing relay Discrete output type Solid state Width 17.5 mm Component name RE17L Time delay type A Time delay range 0.1...1 s 1...10 s 6...60 min 1...10 min 1...10 h 10...100 h 6...60 s Nominal output current 0.7 A Complementary Control type Selector switch on front panel [Us] rated supply voltage 24...240 V AC/DC at 50/60 Hz Voltage range 0.85...1.1 Us Supply frequency 50.
PAGE 2
Dielectric strength 2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812-1 Housing material Self-extinguishing Repeat accuracy +/- 0.5 % conforming to IEC 61812-1 Temperature drift +/- 0.05 %/°C Voltage drift +/- 0.2 %/V Setting accuracy of time delay +/- 10 % of full scale at 25 °C conforming to IEC 61812-1 Reset time 350 ms on de-energisation typical On-load factor 100 % Power consumption in VA 0...3 VA at 240 V AC Power consumption in W <= 1.5 W at 240 V DC Breaking capacity 0.
PAGE 3
Electrical fast transient/burst immunity test, direct at 2 kV conforming to IEC 61000-4-4 level 3 1.2/50 µs shock waves immunity test, differential mode at 1 kV conforming to IEC 61000-4-5 level 3 1.2/50 µs shock waves immunity test, common mode at 2 kV conforming to IEC 61000-4-5 level 3 Conducted RF disturbances, 0.15...
PAGE 4
Product data sheet Dimensions Drawings Width 17.
PAGE 5
Product data sheet Connections and Schema RE17LAMW Internal Wiring Diagram 5
PAGE 6
Product data sheet Connections and Schema Wiring Diagram 6 RE17LAMW
PAGE 7
Product data sheet Technical Description RE17LAMW Function A : Power on Delay Relay Description The timing period T begins on energisation. After timing, the output(s) R close(s). The second output can be either timed or instantaneous. Function: 1 Output Function: 2 Outputs 2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.
PAGE 8
Product data sheet Technical Description RE17LAMW Legend Relay de-energised Relay energised Output open Output closed C Control contact G Gate R Relay or solid state output R1/R2 2 timed outputs R2 inst.